Product thermal capacity : 1-20 t/h Working pressure : 0.7-2 Mpa Available fuel : Nature gas, coke oven gas, biogas, methanol, liquid propane gas, diesel, heavy oil, light oil, crude oil, etc. Available industries : Heat supplying, chemical, food, textile, printing and dyeing, cigarettes and tobacco, fodder, pharmacy, building materials, brewery, rubber, hospital etc. Introduction:
oil thermal hot boiler - Bing is a boiler shell type 3 passes wetback oil/gas fired boiler. After fuel is being atomized by burner, flame is full of the wave furnace and transfer heat via furnace wall, this is 1st pass; the high temperature smoke is collected in reversal chamber and then enters 2nd pass which is grooved tubes bundle area; after heat convection, air temperature gradually falls and goes to front smoke box and turn to 3rd pass, which is smooth tubes bundle area, and then enters chimney passing back smoke box and exhausted to the atmosphere.
Technical advantages Digitized manufacture
The key part such as material cutting, rolling, drilling are proceeded by advanced CNC machining process to reduce the assemble stress and extend boiler working lifetime.
The front and back smoke chamber plates are cut by CNC plasma cutting machine and looks tidy and beautiful.
Easy operation and maintenance
Fully automatically operating, with automatically adjustment and protection of burning, water level, temperature and steam pressure.
Longer working life
Smoke tube and tube sheet connection is expanded first to eliminate the gap between them, then adopt automatic argon arc welding to relief the stress and expand boilers working life.
Longitudinal and girth joint adopt advanced automatic submerged-arc welding for good welding quality. All longitudinal and girth joint will have 100% radiographic inspection.
Fin tube us ND steel or stainless-steel material which avoid low temperature corrosion.
Inspection procedure point is set up to guarantee the sequence of expanding and welding, avoid cracking of the tube sheet holes.
Less fuel consumption
High quality aluminum silicate fiber is used with fire clay insulation, to control the boiler body temperature below 45℃ to control heat lost.
Sufficient steam storage room and heating area makes boiler to generate high quality steam and high thermal power.
Condenser is added to reuse the waste heat of the exhausted smoke to increase feeding water’s temperature and reduce emission temperature, which can increase the thermal efficiency above 98% and save operating cost.
500KW Natural Gas Fired Thermal Oil Boiler use natural gas as fuel, the thermal oil is heated in the tube. Using the circulating pump to force the liquid thermal oil circulation,and then transporting the heat to the thermal equipment.
Our hot oil boilers provide heat through liquid fuel (HFO, light oil) and/or gaseous (natural gas, propane, etc.). A thermal oil boiler is the main component in a thermal fluid heating system, where a liquid fuel is heated and circulated to provide energy to different energy users within a closed circuit.
Author: Sigma Thermal
In thermal oil boilers, a special oil-based thermal fluid is used as the heat carrier - instead of water or steam. This thermal fluid - also called heat transfer fluid (HTF) - operates at atmospheric pressure all the way up to above 300°C.
Many people around the world refer to these systems by different names. The phrases thermal oil heater, thermal oil system, thermal oil boiler, thermal fluid heater, thermal fluid system, thermal oil boiler, hot oil heater, hot oil system, and hot oil boiler generally all refer to the same type of closed-loop liquid phase heat transfer system.
Thermal/hot oil plants. The Danstoker hot oil boiler systems are specially designed for the plant in question and are built according to DIN 7454. A hot oil boiler is often used instead of traditional steam and water boilers, with oil as the heat-transferring media, and is selected typically for its ability to achieve a higher temperature at a
A thermal oil boiler fires through a helical coil and generates energy from the hot products of combustion. This, by heating the coil through radiation and convection. The coil heats the thermal oil or fluid that is pumped through the thermal oil boiler. The thermal oil heats coils in various types of heat users.
firstname.lastname@example.org >Get A Quote >
Romiter Group are professional thermal oil heater, thermal oil boiler, hot oil boiler manufacture. Provide high quality thermal oil heating system for global market. Best thermal oil heater, thermal oil steam generator manufacture and supplier in China. Whatsapp/Wechat/Telegram:
In hot oil boiler designs, synthetic and oil-based thermal fluids are used as the heat carrier instead. This oil operates at nearly atmospheric pressures that reach up to 300C. Yet it will work just as any other heating fluid as it is cooled and heated while passing through the system.
T T BOILERS Thermal Oil Heaters (also called Thermal Oil Boilers, Thermal Fluid Boilers, Hot Oil Units or Diathermic Heaters) are developed and designed especially for demanding process heating operations where no compromise on quality are accepted and where reliability is the key word.
4. Boiler structure is compact, saving the floor area of boiler room. 5.An air pre-heater or heat recovery boiler is placed behind the boiler to improve the thermal efficiency. Then,here are the accessories and valves about the Gas Oil Thermal Oil Boiler: Customer visit: Intimate tips for you here:
1/7/2015· The reason why thermal oil heating becomes more and more used, are mainly related to these features and arguments: - High temperatures up to above 300°C - at atmospheric pressure - Choice-free set-points of the outgoing thermal fluid temperature - Supreme part-load operations without compromising heating quality - No equipment for
This boiler is horizontal type,fire tube,three pass shell boiler.It can burn heavy oil,light oil,city gas,natural gas,lpg,lng,cng(depend on the burner selected).Boiler furnace is corrugated furnace,burning under positive pressure,fully automatic control.
Heat oil to get high temperature, use the high temperature in industrial production. For thermal oil boiler, EPCB has coal fired thermal oil boiler, biomass fired thermal oil boiler, oil fired thermal oil boiler, gas fired thermal oil boiler, which the capacity is from 15x104Kcal/h to 1400x104Kcal/h.
The main determinant of the thermal fluid heater’s price is the thermal power of the heater. In general, the price of the 0.7MW will be lower than the 1.4MW’s (note: the same fuel, the same devices). The price of various thermal fluid heater manufacture
Hot Oil Boiler. Thermal Oil Heater berfungsi sebagai penghantar panas dengan mempergunakan media Oli di dalam pipa yang dirancang spiral didalam tabung/tangki pemanas yang didesain sedemikian rupa yang kemudian dipanaskan api yang bersumber dari burner dengan bahan bakar tertentu.
Thermal oil boiler, a kind of boiler which uses transfer oil as medium, fuel could be gas/oil/coal/biomass, adopts horizontal chamber combustion three-coil structure, and its body is composed of outer oil, middle oil, inner oil and rear oil.