Product thermal capacity : 1-20 t/h Working pressure : 0.7-2 Mpa Available fuel : Nature gas, coke oven gas, biogas, methanol, liquid propane gas, diesel, heavy oil, light oil, crude oil, etc. Available industries : Heat supplying, chemical, food, textile, printing and dyeing, cigarettes and tobacco, fodder, pharmacy, building materials, brewery, rubber, hospital etc. Introduction:
fluidized bed boiler combustors - Bing is a boiler shell type 3 passes wetback oil/gas fired boiler. After fuel is being atomized by burner, flame is full of the wave furnace and transfer heat via furnace wall, this is 1st pass; the high temperature smoke is collected in reversal chamber and then enters 2nd pass which is grooved tubes bundle area; after heat convection, air temperature gradually falls and goes to front smoke box and turn to 3rd pass, which is smooth tubes bundle area, and then enters chimney passing back smoke box and exhausted to the atmosphere.
Technical advantages Digitized manufacture
The key part such as material cutting, rolling, drilling are proceeded by advanced CNC machining process to reduce the assemble stress and extend boiler working lifetime.
The front and back smoke chamber plates are cut by CNC plasma cutting machine and looks tidy and beautiful.
Easy operation and maintenance
Fully automatically operating, with automatically adjustment and protection of burning, water level, temperature and steam pressure.
Longer working life
Smoke tube and tube sheet connection is expanded first to eliminate the gap between them, then adopt automatic argon arc welding to relief the stress and expand boilers working life.
Longitudinal and girth joint adopt advanced automatic submerged-arc welding for good welding quality. All longitudinal and girth joint will have 100% radiographic inspection.
Fin tube us ND steel or stainless-steel material which avoid low temperature corrosion.
Inspection procedure point is set up to guarantee the sequence of expanding and welding, avoid cracking of the tube sheet holes.
Less fuel consumption
High quality aluminum silicate fiber is used with fire clay insulation, to control the boiler body temperature below 45℃ to control heat lost.
Sufficient steam storage room and heating area makes boiler to generate high quality steam and high thermal power.
Condenser is added to reuse the waste heat of the exhausted smoke to increase feeding water’s temperature and reduce emission temperature, which can increase the thermal efficiency above 98% and save operating cost.
Book Edition: 1
View Fluidized Bed Combustor Research Papers on Academia.edu for free. had the same size distribution as the coal particles fed into the boiler, and then a fraction of them, Pr, experienced breakage giving The influence of reactivation by hydration of spent SO2 sorbents on their impact fragmentation in fluidized bed combustors
The primary driving force for development of fluidized bed combustion is reduced SO2 and NOx emissions from coal combustion. Bubbling fluidized bed (BFB) combustors are of interest for plants with a nominal boiler capacity greater than 10 MW th. Circulating fluidized bed (CFB) combustors are more suitable for plants larger than 30 MW th.
Cited by: 906
· PDF fileFLUIDIZED BED COMBUSTION Fluidized bed combustion (FBC) is a combustion technology used in power plants. FBC plants are more flexible than conventional plants in that they can be fired on coal and biomass, among other fuels.
28/3/2019· The primary driving force for development of fluidized bed combustion is reduced SO2 and NOx emissions from coal combustion. Bubbling fluidized bed (BFB) combustors are of interest for plants with a nominal boiler capacity greater than 10 MW th. Circulating fluidized bed (CFB) combustors are more suitable for plants larger than 30 MW th.
· PDF fileFUEL QUALITY FOR FLUIDIZED BED COMBUSTORS ROD HATT Island Creek Corporation, P.O. Box 12029, Lexington, KY 40579 Introduction When the fluidized bed combustor (FBC) was intro- duced to America, it was hailed as the savior of the high- sulfur, high-ash coal market. The design of fluidized bed combustors allows the use of very low grade fuels; and
6. Fluidized bed combustors. Bubbling fluidized bed boilers (BFBB) or circulating fluidized bed boilers (CFBB) are considered as mature technologies (for small scale). Fluidized bed combustion has been indicated as one of the most promising techniques, because of its flexibility, high combustion efficiency and low environmental impact .
22/10/2013· Fluidized Bed Boilers: Design and Application attempts to address the need for a single source of information covering all major areas of fluidized bed boiler design and operation. It is based on the International Workshop on Design and Operation of Atmospheric Pressure Fluidized Bed Boilers, organized by the Center for Energy Studies, Technical University of Nova Scotia in Halifax on 24-45
· PDF fileFluidized bed reactor Good gas-solid contact & mixing High specific heat capacity Can accommodate variations in fuel quality Advantages Disadvantages Carbon loss with ash Feed pre-processing required Fluidized bed combustor burns fuel by adding it to a continually stirred bin of heated sand-like material. This arrangement
Design Aspects of Bubbling Fluidised Bed Boiler for . Fig.4.1. Schematic of a bubbling fluidized boiler system A. Feeding System The feed system of a bubbling fluidized bed (BFB) boiler performs the following tasks: 1) Crush coarse or lump fuel particles into desired sizes (0 to 12 mm).
The evaporator tubes of boiler are directly immersed in the fluidized bed and the tubes, being in direct contact with the burning coal particles, produce very high heat transfer rates. Because of this, the unit size is reduced to a great extent, and also produces combustion with very high efficiency. Types of Fluidized Bed Combustion (FBC)
Fluidized-bed boilers are the most common type of boiler recommended for biomass fuel, which is burned within a hot bed of inert particles, typically sand. The fuel-particle mix is suspended by an upward flow of combustion air within the bed. As velocities increase the gas/solid mix exhibits fluid-like properties.
firstname.lastname@example.org >Get A Quote >
Circulating Fluidized Bed (CFB) combustion boilers gives the flexibility for combustion of a wide range of coals and alternative fuel sources. All this without compromising efficiency and with reduced emissions. This article gives a brief description of the working of a CFB boiler. At the bottom of the boiler furnace there is a bed of inert
The Westinghouse R&D Center in Pittsburgh. Pennsylvania has also investigated circulating bed boiler concepts.^9 A deep recirculating fluidized-bed combustion boiler (Figure 20) was conceived by Westinghouse as an alternative to conventional atmospheric and pressurized fluid bed units.
This report describes the results of an investigation into the status of the design and selection of refractory materials for coal-fueled circulating fluidized-bed combustors. The survey concentrated on operating units in the United States manufactured by six different boiler vendors: Babcock and
For grate-fired and fluidized bed boilers, the overwhelming majority of modeling work employs the Eulerian–Lagrangian approach, in which modeling of the freeboard zone in both grate-fired boilers and fluidized bed combustors is still the same as the structure sketched in Fig. 4.1, while special attention is paid to modeling of the dense fuel bed.
Fluidized Bed Combustion (FBC) “Fluidized bed combustion (FBC) is a combustion technology used to burn solid fuels.” A bed of solid particles is said to be fluidized when the pressurized fluid (liquid or gas) is passed through the medium and causes the solid particles to behave like a fluid under certain conditions.
Circulating fluidized bed technology can be implemented in many different fields ranging from oil and gas to power stations. This technology is highly sought after due to its numerous benefits. Some of the popular applications of circulating fluidized bed are circulating fluidized bed scrubber and circulating fluidized bed gasification system.