Product thermal capacity : 1-20 t/h Working pressure : 0.7-2 Mpa Available fuel : Nature gas, coke oven gas, biogas, methanol, liquid propane gas, diesel, heavy oil, light oil, crude oil, etc. Available industries : Heat supplying, chemical, food, textile, printing and dyeing, cigarettes and tobacco, fodder, pharmacy, building materials, brewery, rubber, hospital etc. Introduction:
bubbling fluidized bed combustion boiler - Bing is a boiler shell type 3 passes wetback oil/gas fired boiler. After fuel is being atomized by burner, flame is full of the wave furnace and transfer heat via furnace wall, this is 1st pass; the high temperature smoke is collected in reversal chamber and then enters 2nd pass which is grooved tubes bundle area; after heat convection, air temperature gradually falls and goes to front smoke box and turn to 3rd pass, which is smooth tubes bundle area, and then enters chimney passing back smoke box and exhausted to the atmosphere.
Technical advantages Digitized manufacture
The key part such as material cutting, rolling, drilling are proceeded by advanced CNC machining process to reduce the assemble stress and extend boiler working lifetime.
The front and back smoke chamber plates are cut by CNC plasma cutting machine and looks tidy and beautiful.
Easy operation and maintenance
Fully automatically operating, with automatically adjustment and protection of burning, water level, temperature and steam pressure.
Longer working life
Smoke tube and tube sheet connection is expanded first to eliminate the gap between them, then adopt automatic argon arc welding to relief the stress and expand boilers working life.
Longitudinal and girth joint adopt advanced automatic submerged-arc welding for good welding quality. All longitudinal and girth joint will have 100% radiographic inspection.
Fin tube us ND steel or stainless-steel material which avoid low temperature corrosion.
Inspection procedure point is set up to guarantee the sequence of expanding and welding, avoid cracking of the tube sheet holes.
Less fuel consumption
High quality aluminum silicate fiber is used with fire clay insulation, to control the boiler body temperature below 45℃ to control heat lost.
Sufficient steam storage room and heating area makes boiler to generate high quality steam and high thermal power.
Condenser is added to reuse the waste heat of the exhausted smoke to increase feeding water’s temperature and reduce emission temperature, which can increase the thermal efficiency above 98% and save operating cost.
Bubbling fluidized-bed units characteristically operate with a mean particle size of between 1,000 and 1,200 μm and fluidizing velocities between the minimum fluidizing velocity and the entraining velocity of the fluidized solid particles (i.e., 4 to 12 ft/s).
Under these conditions the mixture of bed and gas behaves like a fluid and the burning of fuel in such a state is called fluidized bed combustion. It consists of a shell with a distributor plate at its bottom with holes in it. The shell carries the boiler evaporator tubes which remain immersed in …
Bubbling Fluidized-Bed Boilers Circulating Fluidized-Bed (IR-CFB) Boilers Drawing upon our extensive technical expertise and operating experience, B&W developed the Internal Recirculation Circulating Fluidized-Bed (IR-CFB) boiler which is the technology of choice for power plant owners seeking economy, reliability and flexibility.
“ (FBC) Fluidized bed combustion is a combustion technology used to burn solid fuels in steam boilers.” In Fluidized Bed Combustion Boiler technology When air or gas is passed through an inert bed of solid particles such as sand supported on a fine mesh or grid, the air initially will seek a path of least resistance and pass upward through
Atmospheric Fluidized bed boilers are most common and simple FBC boiler where combustion takes place at layer of sand or sand like material. Bubbling of sand bed is created with the help of fluidizing air of velocity 1.2-3.7 m/sec. Coal of size 0-10mmis spread over bed (typically 1-6 mm size for under bed firing and 6-10mm for overbed firing), as soon as it reaches bed combustion takes place.
firstname.lastname@example.org >Get A Quote >
Author: Sumitomo SHI FW
The heat released during combustion heats up the surrounding boiler tubes and generates steam. The major advantages of Bubbling Fluidized Bed Combustion are the enhanced thermal efficiency, easy ash removal. Another type is the Circulating Fluidized Bed Combustion; it is applied to fuels with higher heating values such as Petcoke.
· PDF fileFLUIDIZED BED COMBUSTION Fluidized bed combustion (FBC) is a combustion technology used in power plants. FBC plants are more flexible than conventional plants in that they can be fired on coal and biomass, among other fuels.
5.5 Bubbling Fluidized-bed Combustion (BFBC) Boilers. In a bubbling fluidized-bed unit the fluidizing velocity is low (1.2–3.7 m/s). As a result, the particles are held mainly in a bed that has a depth of 1 m or so and has a definable surface, as already discussed in section 5.2.
· PDF filekind of fuels that is used for solid fuel combustion, the combustion process, largest types of boilers for solid fuels and how they work. Research is also done on how to model the different areas of bubbling fluidized bed combustion. As the model should be able to run in real time
Fluidized-bed boilers are the most common type of boilers recommended for biomass fuel. The fuel is suspended by an upward flow of combustion air through a bed of hot, inert particles, allowing oxygen to reach the combustible material more readily.
ECOFLUID bubbling fluidized bed boilers form an important part of ANDRITZ bio-energy solutions and are used for steam and power generation from biomass and different alternative fuels, such as sludges, RDF, and residues.
Click to view on 2:5330/1/2018· - Circulating Fluidized Bed (CFB) Boiler - Bubbling Fluidized Bed (BFB) Boiler - Biomass Gasifiers - Metallurgical Waste Boilers - CFB Scrubbers Sectors we serve Our CFBs stage the combustion process and operate at …
email@example.com >Get A Quote >
The primary driving force for development of fluidized bed combustion is reduced SO2 and NOx emissions from coal combustion. Bubbling fluidized bed (BFB) combustors are of interest for plants with a nominal boiler capacity greater than 10 MW th. Circulating fluidized bed (CFB) combustors are more suitable for plants larger than 30 MW th.
In fluidized bed combustion, rapid mixing ensures uniformity of temperature. The main advantage of fluidized bed combustion system is that municipal waste, sewage plant sludge, biomass, agricultural waste and other high moisture fuels can be used for heat generation. A fluidized furnace has an enclosed space with a base having openings to admit
Lower excess air required for combustion; Lower unburned carbon; Lower emissions with reduced backend equipment for NOx, SOx, CO, VOC’s and PM; Fuel Options in a BFB Boiler. A key benefit to the Bubbling Fluidized Bed combustion technology is the ability to burn more diverse and lower cost fuel blends with high moisture contents.
Valmet’s boiler solution utilizing bubbling fluidized bed (BFB) combustion technology is called HYBEX. Wide fuel flexibility, high combustion efficiency, high reliability, excellent controllability and low emissions have turned it into a real winner, with over 200 deliveries and boiler conversions around the world.
Boilers Bubbling Fluidized Bed (BFB) Boilers. A bubbling fluidized bed (BFB) boiler is a boiler that can also handle fuels that are difficult to pulverize or less combustible. The fuel is introduced into a mixture of sand flowing at high temperatures, allowing the fuel to be efficiently combusted.
Click to view on 0:562/2/2016· Fluidized bed combustion (FBC) provides several advantages for burning solid fuels, including higher efficiency, lower emissions, and the ability to burn low quality (e.g. high moisture) fuels. This course will focus on the …