Product thermal capacity : 1-20 t/h Working pressure : 0.7-2 Mpa Available fuel : Nature gas, coke oven gas, biogas, methanol, liquid propane gas, diesel, heavy oil, light oil, crude oil, etc. Available industries : Heat supplying, chemical, food, textile, printing and dyeing, cigarettes and tobacco, fodder, pharmacy, building materials, brewery, rubber, hospital etc. Introduction:
high pressure industrial steam boilers - Bing is a boiler shell type 3 passes wetback oil/gas fired boiler. After fuel is being atomized by burner, flame is full of the wave furnace and transfer heat via furnace wall, this is 1st pass; the high temperature smoke is collected in reversal chamber and then enters 2nd pass which is grooved tubes bundle area; after heat convection, air temperature gradually falls and goes to front smoke box and turn to 3rd pass, which is smooth tubes bundle area, and then enters chimney passing back smoke box and exhausted to the atmosphere.
Technical advantages Digitized manufacture
The key part such as material cutting, rolling, drilling are proceeded by advanced CNC machining process to reduce the assemble stress and extend boiler working lifetime.
The front and back smoke chamber plates are cut by CNC plasma cutting machine and looks tidy and beautiful.
Easy operation and maintenance
Fully automatically operating, with automatically adjustment and protection of burning, water level, temperature and steam pressure.
Longer working life
Smoke tube and tube sheet connection is expanded first to eliminate the gap between them, then adopt automatic argon arc welding to relief the stress and expand boilers working life.
Longitudinal and girth joint adopt advanced automatic submerged-arc welding for good welding quality. All longitudinal and girth joint will have 100% radiographic inspection.
Fin tube us ND steel or stainless-steel material which avoid low temperature corrosion.
Inspection procedure point is set up to guarantee the sequence of expanding and welding, avoid cracking of the tube sheet holes.
Less fuel consumption
High quality aluminum silicate fiber is used with fire clay insulation, to control the boiler body temperature below 45℃ to control heat lost.
Sufficient steam storage room and heating area makes boiler to generate high quality steam and high thermal power.
Condenser is added to reuse the waste heat of the exhausted smoke to increase feeding water’s temperature and reduce emission temperature, which can increase the thermal efficiency above 98% and save operating cost.
High-pressure boiler means a boiler operating at a steam or other vapor pressure of over 9.8MPa. It is generally used in power plant, our high pressure boilers used for power generation have capacities of 4 to 400 tonnes/hr of superheated steam with a pressure up to 13.7MPa and a temperature of about 540℃.
Find here High Pressure Boilers, High Pressure Steam Boilers manufacturers, suppliers & exporters in India. Get contact details & address of companies manufacturing and supplying High Pressure Boilers, High Pressure Steam Boilers across India.
A boiler is called a high-pressure boiler when it operates with a steam pressure above 80 bars. The high-pressure boilers are widely used for power generation in thermal power plants. In a high-pressure boiler, if the feed-water pressure increases, the saturation temperature of water rises and the latent heat of vaporization decreases.
firstname.lastname@example.org >Get A Quote >
Industrial Steam’s HPR is specifically designed for the corrugating industry. The HPR is engineered to reduce energy use by collecting high temperature condensate from the system and safely pumping it back to the steam boiler without allowing any flash loss.
The detailed design of the Vitomax boilers and the company's vast experience in building industrial boilers ensure superior quality, high operational reliability and a long service life. The comprehensive Vitomax product range from Viessmann includes steam boilers with a continuous steam output of up to 4 t/h with an operating pressure of 6-20 bar.
High pressure steam boilers are used in power plants and facilities to generate the steam required to power a variety of industrial processes. High pressure steam boilers are designed to heat steam above 15 psi and water at pressures that exceed 160 psig.
Types of High Pressure Boilers. A boiler is a vessel in which water is heated under pressure and vaporized into steam for a specific purpose. There are several different kinds of boilers, heated by coal, solid fuel, oil or gas. Boilers vary widely in size from small, portable or shop-assembled units to …
· PDF fileSteam and high temperature hot water boilers 4 energy consumption Steam and high temperature hot water (HTHW) boilers are commonly used in industrial sectors and in some applications in public and commercial organisations. They are found in circumstances where there is a continual demand for steam or hot water, in a wide
The output range of our high pressure boilers meets the requirements for a wide range of commercial and industrial applications for which high power steam is required. The design of our boilers has been tried and tested in thousands of applications.
High-pressure boilers will heat steam above 15 psi and water at pressures that exceed 160 psig. Temperatures in high-pressure boilers will exceed 250 degrees F. Because of the elevated pressure at which these boilers operate, they need to be monitored to ensure safety at all times.
Boilers are classified as high pressure when they generate steam pressures above 80 bars. The larger the variance between the temperature of the stream while rising and the steam once it leaves the boiler, the higher efficiency achieved. High pressure boilers produce pressures greater than 15 pounds per square inch (PSI).
Steam Boiler Pressure settings: This article describes the normal operating pressure range for residential steam heating systems and for commercial or high-rise building steam heating systems. The article also provides links to details about the pressure control and safety …
Water tube boilers come under the category of the High-pressure boiler which is mainly designed for the power generation stations. In water tube boilers, water and steam mixture is inside the tubes while flue gases or smoke flow across the tubes. Wet Scrubber
Steam & Hot Water Boilers — Chromalox Packaged Electric Steam and Hot Water Boilers are safe and versatile heat sources that produce low or high pressure steam or hot water for commercial and industrial processes and for comfort heating applications.
email@example.com >Get A Quote >