Product thermal capacity : 1-20 t/h Working pressure : 0.7-2 Mpa Available fuel : Nature gas, coke oven gas, biogas, methanol, liquid propane gas, diesel, heavy oil, light oil, crude oil, etc. Available industries : Heat supplying, chemical, food, textile, printing and dyeing, cigarettes and tobacco, fodder, pharmacy, building materials, brewery, rubber, hospital etc. Introduction:
types of high pressure water tube boiler - Bing is a boiler shell type 3 passes wetback oil/gas fired boiler. After fuel is being atomized by burner, flame is full of the wave furnace and transfer heat via furnace wall, this is 1st pass; the high temperature smoke is collected in reversal chamber and then enters 2nd pass which is grooved tubes bundle area; after heat convection, air temperature gradually falls and goes to front smoke box and turn to 3rd pass, which is smooth tubes bundle area, and then enters chimney passing back smoke box and exhausted to the atmosphere.
Technical advantages Digitized manufacture
The key part such as material cutting, rolling, drilling are proceeded by advanced CNC machining process to reduce the assemble stress and extend boiler working lifetime.
The front and back smoke chamber plates are cut by CNC plasma cutting machine and looks tidy and beautiful.
Easy operation and maintenance
Fully automatically operating, with automatically adjustment and protection of burning, water level, temperature and steam pressure.
Longer working life
Smoke tube and tube sheet connection is expanded first to eliminate the gap between them, then adopt automatic argon arc welding to relief the stress and expand boilers working life.
Longitudinal and girth joint adopt advanced automatic submerged-arc welding for good welding quality. All longitudinal and girth joint will have 100% radiographic inspection.
Fin tube us ND steel or stainless-steel material which avoid low temperature corrosion.
Inspection procedure point is set up to guarantee the sequence of expanding and welding, avoid cracking of the tube sheet holes.
Less fuel consumption
High quality aluminum silicate fiber is used with fire clay insulation, to control the boiler body temperature below 45℃ to control heat lost.
Sufficient steam storage room and heating area makes boiler to generate high quality steam and high thermal power.
Condenser is added to reuse the waste heat of the exhausted smoke to increase feeding water’s temperature and reduce emission temperature, which can increase the thermal efficiency above 98% and save operating cost.
This steam steam possesses high pressure kinetic energy.The boiler contains water. The water is heated to its boiling temperature by the use of heat from the furnace. Due to heating of water, it gets converted into high pressure steam. The steam generated is passed through the steam turbines.
There are two general types of boilers: ''fire-tube'' and ''water-tube''. Boilers are classified as "high-pressure" or "low-pressure" and "steam boiler" or "hot water boiler." Boilers that operate higher than 15 psig are called "high-pressure" boilers. A hot water boiler, strictly speaking, is not a boiler. It is a fuel-fired hot water heater.
Water Tube Boiler Components of Water Tube Boiler. The water tube boiler can be built with boiler shell, burner, mud drum or mud ring, furnace, safety valve, strainer, sight glass, feed check valve, steam stop valve, etc. Boiler Shell: This shell is the external cylindrical part of a pressure container.
The arrangement in the Water tube boiler water is that the water is contained inside the tubes while the hot combustion gas flows on the other side of tubes. water tubes boilers produce high pressure steam which is used for power generation purposes. water tube boilers are more efficient and less dangerous than fire tube boilers.
A boiler is called a high-pressure boiler when it operates with a steam pressure above 80 bars. The high-pressure boilers are widely used for power generation in thermal power plants. In a high-pressure boiler, if the feed-water pressure increases, the saturation temperature of water rises and the latent heat of vaporization decreases.
Water Tube Boiler is a high-pressure boiler that operates at a pressure of about 165 bar. Basically, in this boiler, water will be flown inside the tubes surrounded by flue gases. More steam is generated by using this boiler so, the overall efficiency of the boiler is high.
Types of High Pressure Boilers. A boiler is a vessel in which water is heated under pressure and vaporized into steam for a specific purpose. There are several different kinds of boilers, heated by coal, solid fuel, oil or gas. Boilers vary widely in size from small, portable or shop-assembled units to …
A boiler is an enclosed pressure vessel in which water is converted into steam by gaining heat from any source (coal, oil, gas etc). Boiler in thermal power plant accumulates the steam and build up a pressure to expend it in turbine and convert thermal energy to mechanical energy.
Definition of Boiler
Difference between Fire Tube Boiler and Water Tube Boiler. The comparison between two boilers namely water tube as well as fire tube mainly includes working pressure, material type, the rate of steam production, the requirement of floor area, efficiency, load handling variation, design, operator skills, the cost for maintenance are discussed below.
email@example.com >Get A Quote >
Whatever the type of fuel being fired, all high pressure boilers are bound to have a tube failure during the course of their working life. Did you know that a single tube failure in a 500 MW boiler requiring four days of repair work can result in a loss of more than $1,000,000 apart from the generation loss?
Know the construction and working of water tube boilers used on ships. They are used for high pressure steam generation and are quite popular due to their high efficiency of operation. Learn all about these types of boilers in this article
The fire-tube boiler developed as the third of the four major historical types of boilers: low-pressure tank or "haystack" boilers, flued boilers with one or two large flues, fire-tube boilers with many small tubes, and high-pressure water-tube boilers.
A water tube boiler is such kind of boiler where the water is heated inside tubes and the hot gasses surround them. This is the basic definition of water tube boiler. Actually this boiler is just opposite of fire tube boiler where hot gasses are passed through tubes which are…
firstname.lastname@example.org >Get A Quote >
Water tube boilers: In water tube boilers, water and steam flow inside the tubes and the hot gases flow over the outside surface. Modern high capacity boilers are of water tube type. The boiler circulation system is constructed of tubes, headers, and drums joined in …
The water tube boiler generates more steam of high pressure whereas a fire tube boiler generates steam of low pressure. Here, in this article, we will discuss what is a fire tube boiler, different types of firetube boilers, advantages, disadvantages, and applications. What is a Fire Tube Boiler
14/11/2019· Water tube boilers: In the water tube boiler, boiler feed water flows through the pipes into the drum. The circulated water is heated by the combustion gas to form steam in the steam area in the drum. This boiler is chosen if the steam demand and steam pressure are very high as in the case of a boiler for power plants