Product thermal capacity : 1-20 t/h Working pressure : 0.7-2 Mpa Available fuel : Nature gas, coke oven gas, biogas, methanol, liquid propane gas, diesel, heavy oil, light oil, crude oil, etc. Available industries : Heat supplying, chemical, food, textile, printing and dyeing, cigarettes and tobacco, fodder, pharmacy, building materials, brewery, rubber, hospital etc. Introduction:
what waste heat boiler - Bing is a boiler shell type 3 passes wetback oil/gas fired boiler. After fuel is being atomized by burner, flame is full of the wave furnace and transfer heat via furnace wall, this is 1st pass; the high temperature smoke is collected in reversal chamber and then enters 2nd pass which is grooved tubes bundle area; after heat convection, air temperature gradually falls and goes to front smoke box and turn to 3rd pass, which is smooth tubes bundle area, and then enters chimney passing back smoke box and exhausted to the atmosphere.
Technical advantages Digitized manufacture
The key part such as material cutting, rolling, drilling are proceeded by advanced CNC machining process to reduce the assemble stress and extend boiler working lifetime.
The front and back smoke chamber plates are cut by CNC plasma cutting machine and looks tidy and beautiful.
Easy operation and maintenance
Fully automatically operating, with automatically adjustment and protection of burning, water level, temperature and steam pressure.
Longer working life
Smoke tube and tube sheet connection is expanded first to eliminate the gap between them, then adopt automatic argon arc welding to relief the stress and expand boilers working life.
Longitudinal and girth joint adopt advanced automatic submerged-arc welding for good welding quality. All longitudinal and girth joint will have 100% radiographic inspection.
Fin tube us ND steel or stainless-steel material which avoid low temperature corrosion.
Inspection procedure point is set up to guarantee the sequence of expanding and welding, avoid cracking of the tube sheet holes.
Less fuel consumption
High quality aluminum silicate fiber is used with fire clay insulation, to control the boiler body temperature below 45℃ to control heat lost.
Sufficient steam storage room and heating area makes boiler to generate high quality steam and high thermal power.
Condenser is added to reuse the waste heat of the exhausted smoke to increase feeding water’s temperature and reduce emission temperature, which can increase the thermal efficiency above 98% and save operating cost.
Waste Heat Boiler Economizer with Removable End Doors Circular Economizer Economizer with Corrguated Casing Boiler Economizers Heat Exchange Applied Technology Inc. designs and builds the most efficient economizers in the world. Economizers can be designed to operate using exhaust gas from Natural Gas, Oil, Coal, Wood or any other waste gas
ZBG waste heat recovery boilers are custom manufactured based on years of experience waste heat recovery. As a China waste heat boiler manufacturer, Our products are widely used in chemical, cogeneration (combined heat and power) plants,fertilizer plant, coking, etc.
RENTECH Boiler Systems offers a full range of custom designed waste heat recovery boiler systems to meet your most demanding project requirements. RENTECH is an American boiler manufacturer known for its ability to provide custom engineered solutions for a wide variety of applications.
Waste Heat Boiler. Waste-heat boilers are always placed downstream of other items of process equipment, and consequently their operating conditions will always be affected by the conditions in the upstream equipment.
The Incline HRSG reclaims waste heat from a Centaur 40 gas turbine and supplies 19,200 PPH / 135 PSIG steam to the prison for heating and process users. The boiler and auxiliary equipment were delivered and were successfully started up.
4/10/2019· A waste heat boiler uses the heat formed as a byproduct of another process, heat which would normally be wasted, and uses it to create steam. The steam can be used to drive turbines which produce electricity. Alternatively, the boiler can simply be used to heat water or other kinds of fluid.
email@example.com >Get A Quote >
This can be captured for cogeneration in a combined heat and power plant. This heat exits the engine at ~450 o C as ‘high grade heat’, contrasting to ‘low-grade heat’ available from the generator cooling circuits. This high temperature and flow makes it well suited for utilisation in a waste heat boiler.
Cut costs and limit CO2 generation. 50% of your main engine’s fuel energy goes to heat flow. Alfa Laval’s Aalborg technology maximizes waste heat recovery from all sources, benefitting your bottom line and the environment – without compromising onboard safety.
Click to view on 4:5824/2/2013· Explains with working animations steam boilers, waste heat boilers and thermal liquid heaters. Learn about boiler designs, advantages and disadvantages etc. These boilers are mainly used in laundry, refineries, …
a boiler without its own firebox, which uses the heat of waste gases from industrial or power equipment. The temperature of gases entering a waste-heat boiler is 350°-400°C (in the case of a boiler installed behind an internal-combustion engine) to 900°−1500°C (if it is installed behind a reverberatory or refining furnace or a cement kiln).
Waste heat boiler design. Waste Heat Recovery boilers are designed to recover heat from waste flue gases from DG exhaust, Furnace exhaust, Kiln exhaust, incinerator exhaust etc. to produce steam or hot water based on the application requirements of the plant.
· PDF filecirculation boiler, which attempt to recover drastically the exhaust heat rather than for the waste heat, for the demand of co-generating system including gas turbine and diesel engine have been increasing recently. Moreover, Yoshimine is trying to make the total heat balance efficient now, employing the additional burning method.
VKK STANDARDKESSEL Köthen GmbH develops and supplies waste heat boilers for a wide range of thermal processes for generating steam or hot water with smoke-tube boilers. Our expertise in the constructive design of the heating surfaces forms the basis for meeting the high thermal, chemical and mechanical demands even in difficult process conditions.
The boiler feed water economizer is basically a gas-liquid heat exchanger located after the boiler evaporator section. The economizer also uses a portion of the energy contained in the thermal oxidizer combustion gases (after the waste heat boiler) to preheat the boiler feed water before it enters the boiler evaporator section.
Published in: Atmospheric Environment · 1988Authors: Eiji Yanai · Tetsuzo KuribayashiAffiliation: HitachiAbout: Thermal power station · Nitrogen · Air pollution · Power station · Fossil fuel · Heat rec…
Therefore, Sitong Boiler design a number of flue gas waste heat boiler, which can save energy and reduce cost. Application: The flue gas waste heat boiler can be used in power generation plant and supply heating for city, hotel, hospital, bath center, textile industry, wood processing, paper making and other industries Advantages: 1.
firstname.lastname@example.org >Get A Quote >
Waste heat boiler is the significant energy saving equipment, it produces steam or hot water by utilizing the heat of exhaust gas, waste liquid during production process, also, it can use the heat of dynamic mechanical exhaust gas.
1/5/2018· Watch how expenditure on cooling of waste gases is completely eliminated in a Waste Heat Recovery Boiler-based power plant. United Nations Development Programme, India partners with Ministry of Steel to upscale energy efficient interventions in the steel re-rolling mills sector and other sub-sectors of the small scale steel industry in India.